The above github link contains a complete step by step guide that will walk you through getting a 100% functional sonos system in most common lan + guest access to iot vlan scenarios (including airplay, spotify, new device discovery etc. Hello, i was following some tutorials for setting up a wireguard server This one uses a port forward as follows The zone level forward rule controls forwarding between two or more networks that are in the same firewall zone If that is set to accept, it will allow those networks to communicate with each other unless there are any other rules filtering/prohibiting those connections. This guide was created using the thread linked below, but is expanded to include a service that automatically updates the forwarded port in the firewall
Thank you magenta7602, egc, trendy and brada4 for all your help Another important source of information that helped create this guide was This guide assumes that you have protonvpn configured in your openwrt router, with a lan and a vpn. Only manually defined iptables code firewall rules would be relevant here A dedicated wireless access point will be located downstream from the router I'd really like for the.
What the firewall service does is to load the rules from the config files, configure the rules in the kernel, and finish. Context i have working wireguard client on my openwrt lxc container I need to route all lan traffic via that I tried to create a wireguard's zone and edit the forwarding options, but it doesn't work as it should The firewall allows traffic only to the lan network (10.20.20.0/24) and the internal vpn network (10.66.66.0/24), but not to the external network (it does return the destination. These is the rule as it show in luci
Fowarded ipv4 and ipv6 from *lan*, mac Xyz to *wan* (protocol any) reject foward the device a has an update feature to fetch last release from github, so i try to get last update and it still was able to.
WATCH
