To check which version of the firmware is on your board, connect it to your computer and follow the directions for your operating system: The easier way for me is to just use the arduino ide. This is only for use with official arduino hardware and should not be used on other products. Reprogram atmega 16u2 on arduino mega with arduino ide? In part eight of the build an arduino uno from scratch series, we'll start working with the atmega16u2 subsystem which turns usb to serial uart/usart. Hoodloader2 gives you the option to reprogram the 16u2 of a normal arduino uno/mega r3 with custom sketches
This means you can use the 16u2 as a normal usb avr like a leonardo. I also do not believe this to be an issue with the physical circuit, as it is a carbon copy of that used for the arduino uno and arduino mega, both of which have sold millions with a few atmega16u2 issues, not not every single one (as you would expect from a hardware issue). When you connect the board to your computer by a usb cable, if the chipset on the board is not heated, but it doesn't appear under device manager and even there's no unknown device prompt, the firmware of atmega16u2 can be missing You need to reburn it
WATCH
