I know most bullet manufactures say they recommend 1800 to 2200 fps to expand I know bergers are supposed to work a little differently than most hunting bullets. Anyone using a 180 berger with h1000 or retumbo If you are using 180s please list oal, bullet, powder, and velocity The vld is a very accurate target oriented bullet, it gave explosive outcomes from the 264wm and was well behaved from both the 6.5x47 and 260ai Much more fragmentation than from the elite hunter
The hybrid elite hunter is a better hunting bullet in my experience, same goes for the 156g elite hunter It was not until the vld became very popular as a game hunting bullet that we were then able to learn the truth about getting the vld bullets to shoot well in a large majority of rifles After we proved that the berger vld bullets are consistently and exceptionally capable of putting game down quickly we started promoting the vld to hunters. You can try 63.0 grains of retumbo with the old wlr primer and the 168 grn berger hunting vld and nosler 280 ai brass Can anyone share the berger.308 load data out of their berger manual Like to see the charts for
Can anyone recommend good loads with 6mm creedmoor and 88 grain hammer hunter or 105 vld hunting bullets? Hello i just recently did some load work with the 185 berger vld hunting and h4831 I ran the charge at 73 grains with cci 250 primer I did a whole bunch of seating depth test And that's were my problem starts Coal of 3.565 i could feel the bolt had lil bit of tension but i could shut it if i.
WATCH
