Before writing off tac altogether Is it more accurate at lower velocities Most of my loads have been pretty hot, but maybe it likes running a little slower I've tried 77/69/52 smks, 77gr barnes matchburners, 75gr hornady bthp, and. Buy, sell, and trade your firearms and gear. My plinking load for 55 gr
Pills out of a 16 1 in 7 twist is 25.3 gr tac and a cci 400 which chronos at 2700fps The initial ramshot data placed this load as a max load which it obviously wasn't Every time i test, varget yields better accuracy than tac (1/2 moa vs 3/4 moa at 200 yards) For me, in my measure, using my technique, varget meters better than most extruded powders (sd = 0.1 gr) Tac throws with sd = 0.014 gr, however, this low dispersion of charge. Surprisingly, my rifle likes hornady and tac better than sierra and varget
Only downside i see with the bul is it doesn’t use standard 2011 mags So you’ll have to get bul mags or mbx mags made for bul guns I have a few of the mbx bul mags The followers look like they were 3d printed and carved on by a child and one. Tac has been a winner for me 62gr plinking loads at 24gr, 77gr sierras+swifts loaded to mag length with 24.5gr for accuracy, and numerous warm charges while experimenting with defensive bullets (fusion, smk/tmk, tsx, tbbc)
Cci 400s for 223 pressure, 450s or 41s for nato pressure.
WATCH
